Home / Services / Remodel Wiring & Rewiring
Remodel Wiring & House Rewiring in Quantico & Northern Virginia
We wire kitchen, bath and basement remodels and additions, and rewire older homes with outdated or unsafe wiring. The time depends on the size of the job, from a few days for one room to longer for a whole house.
- Expert electrician
- 20+ years of experience in the industry
- Emergency calls 24/7

When to call
- You are remodeling a kitchen, bath or basement, or adding a room
- Your home has knob and tube wiring or ungrounded wiring
- Your home has aluminum branch wiring
- Your insurance company or a home inspector flagged the wiring
Step by step
- We walk the project with you or your contractor and plan circuits, outlets and lights.
- We agree on the price.
- After the permit is issued, we do the rough-in wiring while the walls are open.
- The inspector checks the rough-in before the walls close.
- After drywall, we install devices and fixtures, test everything and get the final inspection.
What it costs
Typical Northern Virginia market range (not a quote)
| Job | Market range |
|---|---|
| Whole-house rewire, finished home | $6 to $12 per sq ft |
| Whole-house rewire, about 2,000 sq ft home | $12,000 to $24,000 |
| Partial rewire (one floor or wing) | $3,500 to $8,000 |
| Electrician hourly rate | $90 to $150 per hour |
Market data for Northern Virginia, not a quote from Electric Sandro. Checked November 2026. Sources: HomeGuide, Angi, BLS OEWS May 2025, Washington-Arlington-Alexandria metro, and prices published by one Northern Virginia electrician. Your price depends on your home, the parts and the permit fee.
Done to code
Check the rule for your town in our Northern Virginia electrical permit checker.
Remodel Wiring & Rewiring: our work and ideas
Photos marked "by Electric Sandro" are real jobs. Others show the kind of work we do.
Remodel Wiring & Rewiring questions
Straight answers to what Northern Virginia homeowners ask most.

What is knob and tube wiring?
It is very old wiring, common before the 1950s, run on porcelain knobs and tubes. It has no ground, and many insurance companies will not cover homes that still use it.
Can you rewire a house without tearing out all the walls?
Often yes. We fish new wire through walls and ceilings from the attic, the basement and small openings, then patch the holes.
Remodel Wiring & Rewiring near you
Other services
Electrical Panel Upgrades
Replace an old, full or unsafe breaker panel. Move up to 200 amps for EV chargers, heat pumps and new rooms.
Learn more →
EV Charger Installation
Level 2 home chargers and 240 volt outlets, wired to code, so your car is full every morning.
Learn more →
Whole-House Surge Protection
A surge protector at your panel guards every circuit: HVAC, appliances, chargers and electronics.
Learn more →
Lighting Installation
Recessed LED lights, pendants, chandeliers, under-cabinet and vanity lights, plus dimmers.
Learn more →
Need an electrician you can trust?
Tell us about the job. We call you back, explain the work in plain words and set a time.